As an amazon associate, I earn affiliate commissions from qualifying purchases.
Brushed nickel faucets may look elegant, but you may find it a bummer to maintain them. Even if you buy the best kitchen faucet, sooner or later, it will have spots on it, and you’ll have to pull your hair.
Now, there are few ways, or shall we say ‘weird ways’ of removing the spots. But not all of them are safe. We’ll make sure you get to know the right way on how to keep brushed nickel faucets from spotting.
To make it easy for you, we have compiled a guide explaining the task.
Why Is Everyone Choosing Nickel Faucets?
Brushed nickel is more of a finish that looks subtle yet sophisticated. With a semi-satin coating, it owns a lightly airbrushed look. Some consumers consider a brushed nickel finish to look more like stainless steel and therefore be very nicely paired with stainless steel appliances of their kitchen.
It not only looks stylish but also tops the list for covering water spots as well as fingerprints. Again, a wide range of bathroom designs, themes, and color palettes are ideal for nickel faucets. You can also get showers and bathtubs with brushed nickel fixtures.
Should You Clean It Every Day?
If you want your kitchen to be squeaky clean, you obviously should clean it every day.
These faucets are more vulnerable to dirt spots being displayed. Try out a raw soap, a clean rag, and water. Typically these are smooth enough to erase the marks of finger-smudge that brushed nickel is most vulnerable to. Do not use fragrant hand-soaps because they can leave additives or have stuff like scrubbing-grit.
You can also use glass cleaners as long as the ingredients do not contain ammonia or any harsh ingredient like alcohol.
So, you should clean the faucets every day using a clean cloth that isn’t very rough along with a liquid soap having balanced alkalinity. By doing this on a regular basis, you can have a clean surface before there is any possibility for dirt to settle in.
How to Remove Deep-Seated Stains?
For built-up dirt or stains because of excess minerals present in the water, you need to use something more substantial to break up the accumulated spots.
You can use a half-half diluted vinegar solution sprayed onto a soft piece of cloth and rinse it thoroughly. In order to properly clean the base of the end or any inaccessible areas, use a cotton ball sprinkled with a glass cleaner.
How Do I Clean the Coating?
After washing it with ammonia or vinegar cleaner, wash the surface with a clean and damp towel.
To remove the residue from the cleansers, rinse the cloth out as required, soaking it again, and completing the cleaning by rinsing it again. With a dry cloth, absorb the remnants of water drops.
When drying your nickel faucets, gently scrub backward and forward to make them shiny clean. Ensure you have washed them thoroughly until you dry your faucets to remove the cleaning residuals off. With a moist cloth that is dampened with normal water, you may clean them off.
Is It Necessary to Use Wax on These Faucets?
If you want to make your faucet looking as shiny as a new one, it is recommended to use wax from time to time.
By applying a coating of wax across the finish, you can quickly restore the shine to the finish. Waxing is something you need to do every month or so. You can use a fine dried-up cloth to spread that wax and rub in small circular movements over the nickel’s surface.
If you like, you can use car wax as it would work just fine. You can then use a separate dry and soft fabric to brush it to make it shiny after covering the finish.
The wax makes it shiny. It also offers a protective coating for the polish to prevent it from fading and protects against careless scratches.
Preventive Measures to Take While Cleaning
Besides avoiding any ammonia glass cleaners, you will need to stop using bleach when cleaning your faucets. You should avoid coarse cloths or abrasive cleaners because they can scrape the taps causing them to degrade their shine.
When your faucets have acidic substances on them, rather than leaving them for the next morning, clean them immediately. They will end up with tough stains if you don’t do it. Avoid leaving sponges, sweeping pads, or napkins overnight around the faucets to keep them safe from discoloration and stains.
Refrain from using sponges made of scratch-pads or steel wool. They will take almost anything off steel, but it can strip the finish patina or protectants from the faucet, even the nickel. So, we recommend you use a soft cloth.
What Can I Use from the Pantry to Clean?
There are quite a lot of cleaning agents sitting on our shelves in the pantry. You can use them as a quick solution.
- You can make water and baking soda paste to polish the nickel faucets that have persistent spots. Next, apply the paste, dry it for a couple of minutes, and then rinse the residuals off with lukewarm water.
- Also, you can use some dishwashing liquid and water on a gentle cloth to clear the smudges around. Stay away from using any soap with a rough feel because otherwise, you will damage the surface.
- Avoid using bleachat all costs.
- Don’t use washing pads that are gritty in texture.
- You can keep the water/vinegar mixture on for up to 30 minutes. The longer you put it on, the quicker it will be to clean it up.
- You have to use warm water instead of cold with the vinegar mixture to make it work more effectively.
Now, to wrap it up, we can say that these faucets are always a nice touch to your home. They give an antique look to your place, making it more rustic yet modern.
But if you want to keep them looking clean and shiny, they require a lot of maintenance. So, now that you know how to keep brushed nickel faucets from spotting, it shouldn’t be a big deal for you.
To keep your brushed faucets clean, always use the mildest approach possible. Wax them once a month and brush the taps after each cleanup. This will maintain the clean and polished look of your brushed nickel faucets.
So, don’t wait! Pick one of them today, and you won’t regret it for sure.